MRD 6000
– User Manual
Page 48 (112)
4.2.11 Configuring Service Selection
This menu allows the user to configure the PIDs or Service the MRD 6000 decodes.
Depending on the Selection Mode that is selected, the menu changes to reflect the
applicable settings.
Service Lock
In Service Lock mode the MRD is set to decode a specified service number or service
name. If the PIDs within the service change at any time, the MRD continues to decode
the service. The drag and drop method can be used to populate the Service Name or
Service Number dialog boxes.
Service Lock Selection Menu
Setting
Range
Description
Selection Mode
Service Lock
PID Lock
Auto Seek
Service Lock
sets the unit to decode PIDs
associated with a service number or service
name. Setting to
PID Lock
sets the unit to
decode only the PIDs specified in the PID
Lock Configuration matrix.
Auto Seek
mode
tunes the unit to the first service listed in the
PAT if a transport stream is present.
