Sencore MRD 6000 User Manual Download Page 24

Page: 24 / 112

MRD 6000

– User Manual

Page 24 (112)

4.1 MRD 6000 Web Interface Overview

4.1.1

Logging into the MRD 6000 Web Interface

To open the MRD 6000 web interface use one of the following supported browsers and
navigate to the unit’s IP address:



Internet Explorer 7 & above



Firefox 3.5 & above



Google Chrome

The user will need to login to the web interface. By default the admin user account is
available without a password. Press the login button in order to login to the web
interface.

User Login Prompt

4.1.2

Hiding Unused Inputs

The MRD 6000 web interface allows the user to hide inactive inputs using the

button or show all available inputs by click the

button. Only the inputs configured as the Primary Input and Backup Input (see Section
4.2.1) will be displayed when unused inputs are hidden.

Summary of Contents for MRD 6000
















































































































Search results

Summary of Contents for MRD 6000

Reviews:

Related manuals for MRD 6000

Brands by name

Popular brands

Sencore MRD 6000, User Manual

Search results

Summary of Contents for MRD 6000

Reviews:

Related manuals for MRD 6000

Brands by name

Popular brands