Sencore DMG 3000, User Manual

Page: 20 / 306

DMG 3200/3100/3000 – User Manual
Page 20 (306)
2.1.4.6 1RU chassis Product model DMG 3200 with DC power
The power input connectors are located at the back of the unit.
0 Volt
-48 volt
Chassis Ground
Figure 2.11 Power Input Connector for 1RU Chassis, product models DMG 3200 with DC power
2.1.5 Information on Disposal
This product must not be disposed of with other household waste. According
to the WEEE-directive, everyone that sells electrical and electronic products
shall ensure that the same products are disposed of in an environmentally
sound manner.
2.1.6 Laser Safety
The Optical SFP modules used in the DMG 3000/3100/3200 products are classified as class 1
laser products according to IEC 60825-1 and are classified as class 1 laser products per
CDRH, 21 CFR 1040 Laser Safety requirements.
Depending on the products configuration, the DMG 3000/3100/3200 products can be
equipped with multiple insertion modules containing housing for optical SFPs.
When installing SFP modules, please ensure that the module be placed in the housing present
at the front of the IP input/output module. Once inserted, the SFP module will become active.