manualshive.com logo in svg

Sena 10s, User Manual, Page: 17 / 58

Share
Download
Sena 10s User Manual Download Page 17

10S

17

English

5  PAIRING THE 10S WITH BLUETOOTH 

DEVICES

Before  using  the  10S  Bluetooth  headset  with  any  other  Bluetooth 

devices for the first time, you will need to pair them together. You can 

pair the 10S with Bluetooth mobile phones, Bluetooth stereo devices 

such as MP3 players, or motorcycle specific Bluetooth GPS navigation, 

and  with  other  Sena  Bluetooth  headsets.  The  pairing  operation  is 

required  only  once  for  each  Bluetooth  device.  The  headset  remains 

paired with the devices and automatically reconnects to them when 

they are within range. You will hear a high toned single beep and a 

voice prompt whenever the headset reconnects to the paired device: 

“Phone  connected”

  to  a  mobile  phone, 

“Media  connected”

  to  a 

Bluetooth stereo device.

5.1  Mobile Phone Pairing - Mobile Phone, Bluetooth 

Stereo Device

1.  Press and hold the Phone Button for 5 seconds until you hear a 

voice prompt, 

“Phone pairing”

.

2.  Search  for  Bluetooth  devices  on  your  mobile  phone.  Select  the 

Sena 10S in the list of the devices detected on the mobile phone.

3.  Enter 0000 for the PIN. Some mobile phones may not ask for the 

PIN.

4. 

The  mobile  phone  confirms  that  pairing  has  been  completed 

and the 10S is ready to use. You will hear a voice prompt, 

“Your 

headset is paired”

.

5.  If the pairing process is not completed within three minutes, the 

10S will return to stand-by mode.

Note:

 

1. If the Bluetooth connection between the headset and a mobile phone is 

disconnected, tap the Phone Button to recover the Bluetooth connection 
immediately.

2. If the Bluetooth connection between the headset and a media player is 

disconnected, press the Jog Dial for 1 second to recover the Bluetooth 
connection and play.

Summary of Contents for 10s



























































Reviews:

No comments