40
Setting of the end positions
4.5.1. Automatic setup- mode
in operation bottom position, top stop/release
In delivery state the drive will, after the connection to the operating element, only execute a
moving interruption, which will be done twice at the first moving operation.
For the operation blocking springs/burglar proof fixations and fixed stoppers trailing edges
are mandatory.
Switch off the power supply and connect the drive to the switch or setting switch.
Operation
Drive
If the running direction of the drive corresponds to ‘Up’ and
‘Down’ of the switch or setting switch, initial operation is com-
pleted.
Perform a test run: The drive stops automatically at the end
positions and performs a short release.
Otherwise, switch off the power supply and swap the grey
and black connecting wires of the outputs of the switch or
setting switch. Initial operation is completed.
Perform a test run: The drive stops automatically at the
end positions and performs a short release.
M 1
~
M 1
~
L
L1
N
PE
4
3
2
2
1
PEN
LPE
N
L1
N
PE
0
L
4
2
3
2
1
0
L
