34
EN
Technical data
7. Technical data
Series
Torque
Nm
Rotation speed
Rpm
Power Input
A
Output
W
1/6
6
15
0.45
105
1/10
10
15
0.45
105
2/7
7
17
0.41
95
2/10
10
17
0.55
124
2/15
15
17
0.66
152
2/20
20
17
0.75
172
2/30
30
17
0.95
220
2/40
40
17
1.50
345
2/50
50
12
1.50
345
Installation location:
After installing the drive, mark the drive type in the technical data table and make a
note of the installation location.
Series 2 motors have a plugin connection cable. Series 1 motors have a 3 m mains
cable as standard which is permanently installed and
cannot
be replaced.
The relevant cable lengths and qualities for series 2 can be selected in the catalogue.
Connection cables must be ordered separately.
Information about connections using special connectors must be requested.
Information for all motor types:
Nominal voltage:
230 V AC/50 Hz
Standby consumption:
0.5 W
Safety class:
IP 44
Operating time:
4 min.
Radio frequency:
868.1 and 868.3 MHz
Max. transmission output: 10 mW
The maximum radio range is up to 25 m indoors and up to 350 m in the open field.
Subject to change without prior notice!
