Selve SE Plus-RC Series, Operating Instruction, Page: 46 / 172

46
GB
Setting of the end positions
4.5. Setting of the end positions with setting switch/switch
Note:
Settings with a wired switch are only possible in automatic setting mode.
When connecting the setting switch for radio motors, consider the following:
Caution! Risk of injury through an electric shock!
Connection only when de-energised!
The 5 wires in the setting switch cable must be connected to the motor wiring cable
according to their colours.
SELVE setting switch (item no. 290109)
LED indicates connection in correct phase sequence
Pushbutton E is the setting pushbutton
Pushbutton for moving the motor up and down
Caution: Always connect L1 (= brown) to the permanent voltage supply 230 V even if
the motor is only connected for adjustment purposes with a switch or a setting
switch.
UP = grey
DOWN = black
N = blue
L1 = brown
PE = yellow-green
Warning!