38
Setting of the end positions
4.5. Setting of the end positions with setting switch/switch
Note: Settings with a wired switch are only possible in automatic setting mode.
When connecting the setting switch for radio motors, consider the following:
Warning!
Caution! Risk of injury through an electric shock!
Connection only when de energised!
The 5 wires in the setting switch cable must be connected to the motor wiring cable accord-
ing to their colours.
UP = grey
DOWN = black
N = blue
L1 = brown
PE = yellow/green
Control Up/Down
E button
SELVE setting switch
article no. 290109
SELVE universal setting switch
article no. 291009
Caution: Always connect L1 (= brown) to the permanent voltage supply 230 V even if the
motor is only connected for adjustment purposes with a switch or a setting switch.
Note: The following settings can be made with both the SELVE setting switch (article no.
290109) and the new SELVE universal setting switch (article no. 291009).
