SELVA MARINE Kingfish 25, Service Manual

Page: 377 / 398

10-7
MNT
Maintenance
TIP:
• Tighten or loosen the friction adjusting nut
with the steering lock lever in the position
a
.
• To increase the friction, tighten the friction
adjusting nut
1
in direction
c
.
• To decrease the friction, loosen the friction
adjusting nut 1 in direction
d
.
Checking the throttle cable and shift
cable
1. Move the shift lever to the N position and
fully close the throttle grip. (Tiller handle
model)
Move the remote control lever to the N
position and fully close the throttle lever.
(Remote control model)
2. Check that the fully closed stopper
a
on
the throttle cam
1
contacts the stopper
b
.
È
Tiller handle model
É
Remote control model
3. Check that the shift link lever
2
is in the
N position. (Remote control model)
Checking the tilt system (manual tilt
model)
1. Move the tilt lock lever
1
to the release
position
a
and fully tilt up the outboard
motor. Check that the outboard motor
tilts up smoothly and automatically locks
in 3 positions when it is tilted up.
2. Check that there is no interference with
cables, hoses, or leads when the tilted-
up outboard motor is steered.
a
A
1
d c
A
a
1
b
È
1
b
a
É
2
2
N
R
F
a
1