SELVA MARINE Kingfish 25, Service Manual

Page: 355 / 398

BRKT
Bracket unit
9-65
2. Install the PTT motor lead
4
, springs
5
,
circuit breaker
6
, brush holder
7
, and
brushes
8
and
9
, and then tighten the
screws
0
to the specified torque.
3. Push the brushes 8 and 9 into the
brush holder, and then install the arma-
ture assembly
A .
4. Install the stator B , and then tighten the
screws C to the specified torque.
Installing the PTT motor
Do not reuse an O-ring, always replace it
with a new one.
1. Install a new O-ring 1 , the joint 2 , the
spring 3 , and the PTT motor assembly
4 , and then tighten the bolts 5 to the
specified torque.
Brush holder screw
0
:
1 N·m (0.1 kgf·m, 0.7 ft·lb)
Stator screw
C
:
2 N·m (0.2 kgf·m, 1.5 ft·lb)
4
6
5
5
7
8
9 0
0
A
9 8
B
C
C
PTT motor assembly bolt 5 :
7 N·m (0.7 kgf·m, 5.2 ft·lb)
3
1
2
4
5
5
5
5