SELVA MARINE Kingfish 25, Service Manual

Page: 257 / 398

LOWR
Lower unit
8-39
Removing the propeller shaft
housing assembly
1. Remove the propeller shaft housing
assembly
1 .
TIP:
• Insert flat-head screwdrivers between the
propeller shaft housing assembly
1
and
the lower case to remove the propeller
shaft housing assembly.
• If the propeller shaft housing assembly
1
is
stuck to the lower case, use the special ser-
vice tools. See “Measuring the forward and
reverse gear backlash before disassembly”
(8-55).
Disassembling the propeller shaft
assembly
See “Disassembling the propeller shaft
assembly” (8-8).
Disassembling the propeller shaft
housing assembly
1. Remove the reverse gear
1
and reverse
gear shims
2
.
2. Remove the ball bearing
7
.
3. Remove the oil seals 8 with the needle
bearing 9 .
Checking the propeller shaft
See “Checking the propeller shaft” (8-9).
1
1 4
5
2
5
6
3
4
1
Stopper guide plate
3
: 90890-06501
Bearing separator
4
: 90890-06534
Bearing puller assembly
5
: 90890-06535
Stopper guide stand
6
: 90890-06538
Stopper guide plate 4 : 90890-06501
Bearing puller assembly 5 : 90890-06535
Stopper guide stand 6 : 90890-06538
Needle bearing attachment
0
:
90890-06614
Driver rod L3 A : 90890-06652
5
6
4
7 5
A
0
9
8
0
9