SELVA MARINE Kingfish 25, Service Manual

Page: 111 / 398

5-17
ELEC
Electrical system
Checking the engine start switch
(remote control model)
1. Disconnect the 10-pin main wiring har-
ness coupler.
2. Measure the engine start switch input
voltage at the 10-pin main wiring harness
coupler
a
.
3. Move the remote control lever to the N
position.
4. Check the engine start switch for continu-
ity.
5. Connect the 10-pin main wiring harness
coupler.
Checking the engine shut-off switch
(tiller handle model)
1. Disconnect the engine shut-off switch
connector
a
and ground terminal
b
.
2. Check the engine shut-off switch
1
for
continuity between the engine shut-off
switch connector
a
and the ground ter-
minal
b
.
Engine start switch input voltage
(reference data):
Terminal
b
–Terminal
c
12 V (battery voltage)
b
a
c
d
e
f
g
OFF
ON
START
Engine start switch continuity:
Switch
position
Terminal
d e f g
OFF
START
W W
B
1
a
b
b
a
c d e