background image

 

PAY ATTENTION TO THE PROPELLER 
 
The propeller is certainly the least protected part of your motor. It is 
therefore forbidden to get near the propeller when this is rotating. You 
must leave bathers, skiers and other boats users enough space to move, 
in order to avoid any contact with the propeller. Picture No. 4. 
 
 
The engine operator must attach the engine stop switch lanyard to his 
wrist when the motor is on. Picture No. 5. 
 
 
Never sit on the motor. Picture No. 6. 
 
 
Never change the inclination angle of your motor using the steering rod, 
but use the proper handle. Picture No. 7. 
 
 
The motor must always have its top cowling on, when it is  operating  
Picture-No. 8. 
 
 
When you connect the fuel joint, check the proper connection Picture No. 
9. 
 
 
When starting there must be nobody within the engine operator's action 
radius.( model with manual start ).  
Picture No. 10. 
 
 

 
There must be nobody within the motor steering radius.  
Picture No. 11. 
 
 
The free lock lever must always be engaged while the motor is in motion.  
Never tilt-up the motor out of the water, while it is in motion.  
Picture No. 12. 
 
 
Never pull the recoil starter handle, while the motor is running.(model with 
manual start ). Picture No. 13. 
 
 
To transport the motor use only the proper handle. 
Before transporting the motor you have to tilt-up the steering rod properly. 
The fuel tank is also provided with a handle to use for the transport. 
Picture No. 14. 
 
 
When starting or operating the engine, do not touch electrical parts and 
particularly the ignition-coil, the high voltage wire, the spark-plug cap and 
the spark-plug itself. 
 
 
When opening the safety valve of the fuel tank, highly flammable vapours 
come out. Do not smoke, inhale or use open flames close to it. 

https://www.boat-manuals.com/

Summary of Contents for ANTIBES 15XS S505XS
















































Reviews: