SELVA MARINE ANTIBES 15XS S505XS, Owner'S Manual

Page: 21 / 47

20
ß
Fix the plate to the (4) handle or to the plate in correspondence
of the holes (using the screws which are in the kit
k40).
The plate must be fixed in order to allow the insertion of the
retainer (1) beginning from up to down.
ß
Insert the sheathing retainer on the cables (1)
ß
Screw the counter-nuts (accessories of the Kit K40) to the end
of the threaded part of the control cables
ß
Screw completely the gas plate connector (3) to the
accelerator control
ß
Insert the sheathing retainer in the fixation plate, control if
connecting the connector (3) in the pawl of the plate of control
of the accelerator, the housing of the cotter pin is in
correspondence of one of three holes in the sheathing retainer.
In contrary case unscrew the plate connector to achieve the
correct position.
ß
Insert the same connector in the plate of control of the
accelerator, and ensure the connection through the gripping of
the spring fixed on the plate connector.
ß
Insert in the hole of the sheathing retainer, that corresponds to
the housing of the same sheathing, the fixing cotter pin (5).
ß Screw the other fixation plate sheathing retainer to the basin in
correspondence of the holes which are on one side of the
gears handle. Insert in the plate the sheathing retainer
mounted on the cables of the gears control.
ß Screw completely the gears handle connector on (2) the gears
control cables and make the regulation
of the distance between the sheathing retainer and the gear
control handle for the gas control cable.
ß
Insert the pin on the connector of the gears handle in the
housing which is on the same handle, push the ring nut of the
pin and rotate the pin to put the retainer of the pin on the beat
of the handle.
ß
Insert in the sheathing retainer hole, which corresponds to the
housing of the sheathing, the fixing cotter pin (5).
ß
Fix the position of the gears handle connectors and of the gas
plate with the counter-nuts
Picture No.46
Control at the end of the operations the correct functioning of
the remote control box.
https://www.boat-manuals.com/