background image

 

11 

REMOTE CONTROL BOX 
(Only for electric start models) 
 
MAIN COMPONENTS 
 

CONTROL LEVER 

NEUTRAL LEVER FIXING ROD 

NEUTRAL GEAR ACCELERATOR CONTROL LEVER 

4 STARTING 

KEY 

5 ELECTROCHOKE 

6 SECURITY 

SWITCH 

7 TACHOMETER 

CONNECTOR 

8 

ELECTRIC MOTOR WIRING 

GAS CONTROL FLEXIBLE WIRES 

10 

GEAR CONTROL FLEXIBLE WIRES 

11 

SCREW REGULATING CLUTCH AND ACCELERATOR 

Picture No. 17 

 

CONTROL FUNCTIONS  
(remote control box)) 

Control lever 
It controls the selection of the forward gear, of the reverse gear and of the 
acceleration 

Neutral lever fixing rod 
It fixes the control lever in the neutral position end has to be pulled up to 
select the forward gear or the reverse gear. 

 
Neutral gear accelerator control lever 
It allows to control the accelerator when the clutch is in the neutral 
position, to increase the number of r.p.m. you must pull it up. 

 
Starting key 
Turning it in a clockwise direction till the position ON the electric circuit 
operates, continuing with the rotation till the START position the motor 
starts. If you release the key from the START position, it returns 
automatically to the ON position. To switch of the motor put the key in the 
OFF position. 

 
Electrochoke 
Pushing up the switch you activate the cold motor star device. leaving the 
switch it comes back automatically in the original position. 

 
Security switch 
Insert the nippers of the wire to be bound around the pulse. In case of 
necessity give a blow to the wire and the motor stops. 
The motor doesn't start if the nipper of the security switch isn't connected. 
 
Tachometer connector 
To be used to connect the tachometer. 
 
Wiring connector  
To be engaged with the motor connector to get the electrical connection. 

https://www.boat-manuals.com/

Summary of Contents for ANTIBES 15XS S505XS
















































Reviews: