Select.live Operation
Selectronic Australia
OI0009 Revision 01 Select.live User Manual
33
Position
Description
C
My Network table
–
shows information and action for the Wi-Fi and
Ethernet of the device.
•
Name
–
Wi-Fi and Ethernet.
•
Mode
–
Mode the of Wi-Fi and Ethernet
o
AP
–
Ad-hoc (Hotspot) mode, only for Wi-Fi
o
Client
–
Normal mode for Wi-Fi and Ethernet
•
DHCP
–
DHCP mode for the Ethernet only (not available for Wi-Fi)
o
on
–
DHCP is enabled for the Ethernet only
o
off
–
DHCP is disabled for the Ethernet only
•
IP
–
IP address of Wi-Fi and Ethernet respectively. If not available,
represented by “
-
“
.
•
Netmask
–
Netmask address of Wi-Fi and Ethernet respectively. If
not available, represented by “
-
“
.
•
Action
–
[Edit] buttons.
o
Wi-Fi [Edit]
–
open a form to edit Wi-Fi connection (See
page 36)
o
Ethernet [Edit]
–
open a form to edit Ethernet connection
(See page 38)
D
[Apply Network Changes] button
–
on click, applies changes made in Wi-Fi
and Ethernet connection.
E
Device firmware status (see page 40)
•
Status
–
provide the status of the firmware by the following text:
o
“Firmware is up
-to-
date”
o
“Firmware
can be updated to x.x.x
”
o
“
Firmware update x.x.x downloading in progress
…”
o
“Firmware
update x.x.x is downloaded and ready to install.
”
o
“FIRMWARE UPGRADE IN PROCESS…”
•
[Check for new Firmware] button
–
Changes button label as follows:
o
[Check for new Firmware]
–
on click, check for new
firmware. If available, change the status
text to “New
Firmwa
re is available” and
the button to [Download
Firmware]
o
[Download Firmware]
–
on click, download new firmware
and changes button to [Cancel Download] during download
and [Install Firmware Update] after download
o
[Install Firmware Update]
–
On click install the firmware and
reboots.