manualshive.com logo in svg

Selectronic Australia WM1500-24V, Owner'S Manual, Page: 1 / 19

Share
Download
Selectronic Australia WM1500-24V Owner'S Manual Download Page 1

1

S

ELECTRONIC 

A

USTRALIA

WM1500-24V OWNERS MANUAL

Contents:

Page

INTRODUCTION ...............................................................................................................................2
WARRANTY CARD ............................................................................................................................2
INSTALLATION.................................................................................................................................2

BATTERIES .............................................................................................................................................................4

CONNECTION OF AC AND DC WIRING..........................................................................................................4

OPERATION.......................................................................................................................................6

MODE BUTTON & LED’s .....................................................................................................................................6

STATUS & ALARM INDICATORS - LED 5 (green) OFF .................................................................................6

DEMAND START ADJUST - LED 5 (green) ON.................................................................................................7

LOW VOLTS ADJUST - LED 5 (green) FLASHING..........................................................................................8

HANDY HINT.....................................................................................................................................9
FAULT FINDING ............................................................................................................................10
SYSTEM MAINTENANCE..............................................................................................................11

WM1500 MAINTENANCE...................................................................................................................................11

BATTERY MAINTENANCE ...............................................................................................................................11

WM1500 ELECTRICAL SPECIFICATIONS.................................................................................12
RADIO FREQUENCY INTERFERENCE......................................................................................13
USING A SELECTRONIC KEYPAD WITH THE WM1500-24....................................................14

SERIAL PORT WIRING ......................................................................................................................................14

KEYPAD WIRING ................................................................................................................................................14

KEYPAD FRONT PANEL (Display not shown for clarity)...............................................................................14

STATUS ..................................................................................................................................................................15

READINGS (Keypad Grey Keys).........................................................................................................................15

SETTINGS (Keypad Light Blue Keys).................................................................................................................17

OPTIONS (Keypad Light Blue Keys)...................................................................................................................18

DIAGNOSTICS (Keypad Light Blue Keys).........................................................................................................18

INVERTER ALARMS...........................................................................................................................................18

WARNING.........................................................................................................................................19
PRODUCT WARRANTY CONDITIONS ........................................................................................19

Rev 1.01

30 January 2001

Summary of Contents for WM1500-24V




















Reviews:

No comments