LOCOMOTOR Rotastand...Compact
LOCO-600 MANUAL
1 Unpacking Instructions
1.1 The Rotastand Compact is supplied in a custom made packing box.
1.2 Carefully remove the Rotastand Compact from the packing box.
1.3 Retain the packing box if possible.
1.4 The Rotastand Compact is in two parts that are packed together and held as one by a plastic film.
1.5 Carefully remove the plastic film and protective materials. Take care not to damage the product when
removing the protective materials.
2 Assembly instructions
WARNING
Never rotate the Handle clamp wheel
clockwise unless the handle is in place
2.1 Pull the black mast release flange towards the top of the
mast as indicated in Fig A1.
2.2 Rotate the mast as far as it will go to the near vertical position as shown in fig A2.
2.3 Release the mast release flange. The mast release flange will drop back to its original position locking
the mast in position.
2.4 Rotate the handle clamp wheel 1 turn anti clockwise.
2.5 Pull the handle latch knob as shown in fig A2.
2.6 Offer the handle to the mast as shown in fig A2.
2.7 Insert the handle into the mast and lower it to its lowest position as shown in fig A3.
2.8 Release the mast latch knob.
2.9 Pull the handle up until the mast latch knob returns to its original position and locates in the lowest
hole in the handle.
2.10 Tighten the handle clamp wheel.
2.11 The Rotastand Compact is now ready to be adjusted for patient use.
Select Healthcare (UK) Ltd,
Unit 2 Albert Road, Rushden, Northants, NN10 0BU
Tel: +44( 0)1933 411729 Fax: +44(0)1933 410213 Email [email protected]
Designed and Developed by: Proto Magic Innovations Ltd
Rotastand Compact OPERATING AND SERVICE INSTRUCTIONS Ver 02 .doc 10/01/2013
Page 2
Fig A3
Handle
Fig A1
Mast release flange
Handle
latch
knob
Handle
clamp
wheel
Fig A2
Mast
