Selco EB 70, Machine User Manual

Page: 85 / 94

(
BIESSE S.p.A. Woodworking Machinery
(a113h004.fm-141101)
$SSHQGL[( *XDUDQWHHDQGFOLHQWVHUYLFLQJ
( &RQGLWLRQVRIWKHJXDUDQWHH
BIESSE S.p.a. guarantees that the machine was tested at its own premises and that a positive
result was obtained.
The guarantee shall remain valid for a period of 12 months starting from the date of delivery unless
there is an agreement between BIESSE S.p.a. and the purchaser to define the commissioning of
the machine at the latter’s premises. When, however, it is agreed between both parties that
commissioning shall be performed at the purchaser’s premises, the guarantee shall be valid for a
period of 12 months starting from the date of commissioning of the machine at the purchaser’s
premises and, in any case, for a period of no longer than 9 months following the date of delivery.
Working hours over 48 hrs./week shall result in corresponding reductions in the period of validity of
this guarantee.
BIESSE S.p.a. shall be also considered liable for defects in electric and electronic parts of the
machine. The guarantee shall not cover defects caused by normal wear and consumption of those
parts which, by their very nature, are subject to rapid and continuous consumption e.g. gaskets,
belts, brushes, fuses etc. The guarantee for replaced or repaired components shall expire on the
same as expiry of the guarantee of the machine itself.
Furthermore BIESSE S.p.a. shall not be liable for any lack of conformity of the machine deriving
from a failure to observe regulations indicated in the instructions manuals and in any case due to
inappropriate use or treatment of the machine. The purchaser may thus demand that any parts
found to be faulty be replaced provided that such faults are not attributed to mis-handling and, in
the case of modification, provided that BIESSE S.p.a. has issued prior written consent.
The purchaser shall lose any right to this guarantee if he or she does not provide BIESSE S.p.a.
with a detailed written account of the nature of any defects of conformity found in the machine
within 15 days following discovery of the fact. Moreover, the purchaser shall lose his or her right to
this guarantee if he or she does not allow the vendor to perform all checks required or if, the
vendor having requested the return of a faulty component at its own expense, the purchaser fails
to return the component as soon as possible after such a request.
The technical documents which accompany the machine are prepared with close reference to the
content of the corresponding Directives and current safety regulations. It is therefore of the utmost
importance that the user read completely all volumes of the same in order to obtain from the
machine the best possible performance and to ensure the maximum lifetime to its component
parts.
The configuration of some parts or devices described or illustrated in the documents may differ
from the configuration actually present in the machine in a specific version designed and prepared
for particular requirements or safety standards. In this case, certain descriptions, references or
advised procedure may be of a generic nature although their effectiveness shall remain valid. The
supply of tools or special equipment with the machine is conditioned by the specific characteristics