Selco EB 70, Machine User Manual

Page: 58 / 94

&KDSWHU
5HSODFHPHQWVDQG$GMXVWPHQWV
BIESSE S.p.A. Woodworking Machinery
(l138h009.fm-141101)
%ODGH%HOW5HSODFHPHQW
1. Turn the blade change selector (key) on the
main button pad to the right (ref.
B5 , page
3 - 3 ), and then remove the key. The
motors switch off, the carriage moves to a
pre-set position and a system which, after a
lapse of time, automatically releases the
blade A access hatch, is enabled.
2. Open the blade $ access hatch once the
lamp on the pushing device selector
(yellow) is lit; this selector is located on the
main button pad (ref.
B8 , page 3 - 3 ).
3. Switch off the machine.
4. Loosen the % nuts DQGRQHRIWKH&
VFUHZV (it is unimportant whether the
chosen screw is on the left-hand side or on
the right-hand side), then remove the cover
' .
5. Remove the blades as described in the
paragraph
8.1 “Blades Replacement” on
page 8 - 1 .
6. Remove the casing ( .
7. Remove the suction pipe ) .
8. Remove the casings * and + .
'
&
%
$
(
)
*
*
+
+