Date Code 20160329
SEL-651RA Recloser Control
Introduction
This 3-pin cable for input power provides a three-pin male receptacle that
exits from the bottom of the cabinet. The 3-pin cable for input power is
internally wired to the control module’s power supply terminals. Therefore,
the 3-pin cable for input power also supplies power to the outlet and/or any
other accessories effectively connected in parallel with the power supply
terminal. The 3-pin receptacle provides a means (by way of an external cable,
which is not included) to connect input power to the control.
Parts
Installation
Step 1. Install the 3-pin cable for input power in the bottom of the
cabinet in the leftmost hole in the front row. Insert the
receptacle from the inside of the cabinet and the four screws
from the outside. Install the nuts on the screws from the inside
of the cabinet. See Figure 1.
Figure 1
Install Ring Terminal
SEL Part Number
Description
Quantity
SEL-C2261
3-pin cable for input power
1
080-0101
5/8 steel wire clamp
2
140-0500
4-40 x 1/2" screw
4
140-0740
4-40 hex nut
4
144-0140
Plastic cap
1
310-0050
Zip ties
12
SEL-651RA Installation Instructions for
3-Pin Cable for Input Power
