SR-1800
Fixing Sheet Jams
When a sheet jam occurs, fix it according to the following procedure.
(1) Hold Part A of the top cover and open it, pull upward and remove it.
(2) Remove the sheet that is jammed in the sheet feed section.
If necessary, lift up the reading sensor unit to remove the sheet that is jammed.
CAUTION
You can lift the reading sensor unit approximately 15mm. Slowly move it vertically up and
down, and be careful not to hit the unit against other parts.
(3) After the sheet is removed, make sure that there are no remaining bits of torn sheet left in the
sheet feed section.
CAUTION
If bits of torn sheet remain in the sheet feed section, it may cause another sheet jam. Make
sure to remove all of them.
Part A
Top cover
Reading sensor unit
Sheet feed roller
Part A
Top cover
Reading sensor unit
Sheet feed roller
