54
9. Input/Edit the camera /film profile
characteristics.
a. Touch +/- buttons or move slider to set
desired exposure compensation value
/- 5 EV (stop) range.
b. Touch +/- buttons or move slider to
desired values of dynamic ranges and
clipping points for profile /- 10 EV
(stop) range.
* Clipping points cannot exceed Dynamic
range.
c. Touch
[OK]
to return to ISO selection
screen. (Touch
[Cancel]
if editing is not
needed. Touch
[Default]
if reset the profile
of ISO being selected.)
10. Touch
[Close]
to return to Start screen for
Edit profile. Create or Edit profile name if
desired. (See P51 for details.)
11. Touch
[Close]
to return to the Select Profile
to Edit/Check screen.
6-6-5. Frame Rate Editing
In addition to the standard frame rates available in the L-478 Series, up to 20 frame
rates can be customized and displayed in the meter screen.
* Frame rate is set in 0.001(f/s) step over a range of
0.001 to 9999.999(f/s).
1. Press the Menu button
7
on the meter. (See
P21 for details.) to open the Menu screen.
2. Touch
[6. Edit Frame Rate]
to display Select
Frame Rate to Edit screen.
3. Touch the check box
✓
to display the
customized frame rate in the f/s setting icon
in the Measuring screen for HD CINE mode
and CINE mode. (A check mark
✓
indicates
frame rate is available for use. To deactivate
the frame rate, touch box again to return to
❑
.)
4) Touch
▲
/
▼
or slide finger on bar to select
frame rate and touch one of the frame rate
button to display Input Frame Rate screen.
5) Touch buttons on the keypad to input the
value of frame rate. (See P13 for details on
inputting.)
ISO Selection Screen
Profile Characteristic Edit
Screen
Exposure
Comp. Value
Dynamic
range (+)
Clipping point (+)
Clipping point (-)
Dynamic
range (-)
Frame rate Edit Selection Screen
Input Frame rate Screen
Check to display or not in the Frame
Rate setting in the Measuring Screen