background image

1. Prior to maintenance or inspection, be sure to turn off the power. 
2. Confirm that the screws and bolts are fastened properly and tightly.
3. The wirings work of fixings perform fixings and outside of wiring. 

4. Don't open the fixing, please.

5. The supply voltage should be within the range of rating, and the supply voltage variation should be within ±6%.
6.

7.

8. Prior to maintenance or inspection, be sure to turn off the power.

9. To prevent shortening of the service life, avoid turning on the fitting in direct sunlight.

10. To avoid noise or malfunctioning, don't use a radio, television or wireless infrared remote control near the fitting.

11.

12.

13.

14.

15. The LED lamp and the power supply unit cannot be replaced.
16.

Do ’t look straight at the LED la p. It ca  da age your eyes.

17. If there is a heat source near the product, the product may overheat due to radiation heat. Use a heat shield plate or thermally insulating

glass to prevent the product from being affected by radiation heat.

In grounding work, be sure to follow the technical standards for electrical equipment of your country.

Don

t open the front glass. The internal components such as the LED lamp become very hot. Don

t touch the LED lamp since a malfunction

or lighting failure might occur.

For white LED lamps, the luminescent color and brightness may vary with individual LEDs because of their nature. Also note that the rate
of attenuation with time varies with individual LED lamps.

The product must be mounted on a sturdy wall surface or structure which is vibration-free and less susceptible to damage. Otherwise, it
might fall or be damaged.

For use in an unfavorable location (a very hot, cold or humid place or a place in which there is strong wind or vibration, a salt damage
environment or a dusty or corrosive gas atmosphere), a special countermeasure should be taken.

The ambient temperature should be within the range of -20°Cto +50°C. There should be no influence of radiation heat .The use of the
product out of this range may shorten the service life.

CAUTIONS 

-   -

Summary of Contents for LCTD110181-N






Reviews: