Minute hand
Stopwatch second hand
(Move in second increments)
Second hand
Hour hand
Stopwatch minute hand
(Move in minute increments)
EN
GL
IS
H
<<OPERATION --
VD 52 B>>
DISPLAY AND CROWN/BUTTON OPERATION
ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the Stopwatch second and minute hands are at the "0"(12 o'clock) position.
If the stopwatch is in use, press the button in the following order to reset it, and then, check if the hands return to "0" position.
(For details, see "HOW TO USE THE STOPWATCH")
If the stopwatch is counting:
(A)
(B)
If the stopwatch is stopped:
(B)
If the split time is displayed:
(B)
(A)
(B)
* If either of the stopwatch hands are not at the "0" position, reset them following the procedure below:
3. Push the crown back to the normal
position.
2. Turn the crown
clockwise until the
previous day's date
appears.
24-hour hand
(Indicates the time on a 24-hour basis)
Button (A) *In stopwatch function Start/Stop
Crown at normal position
Button (B) *In stopwatch function Split/Split release/Reset
Second click *Time setting
First click *Date setting
* The measured time is indicated by the stopwatch hands that move independently of the center and 24-hour hands.
1. Pull out the crown to the
second click.
2. Press button (A) or (B) to reset the stopwatch second and
minute hands to "0" position.
* By pressing button (A), set the stopwatch second hand.
* By pressing button (B), set the stopwatch minute hand.
TIME SETTING
* Before setting the time, check that the chronograph measurement is stopped.
4. Push the crown back in to the
normal position in accordance
with a time signal.
3. Pull out the crown to the second click
when the second hand is at the
12 o'clock position.
It will stop on the spot and advance
the hour and minute hands by
turning the crown.
(Check that 24-hour hand is set
correctly.)
* When the crown is at the second
click position. Do not press any
button. Otherwise, the
chronograph hands will move.
* Do not set the date between 9:00 P.M. and 1:00 A.M.
Otherwise, the day may not change properly. If it is necessary to set the date during that time period, first change the time to any time
outside it, set the date and then reset the correct time.
1. Pull out the crown to the
first click.
VD52-P.1
Crown
Crown
A
B
Stopwatch
minute hand
Stopwatch
second hand
