Seiko SNP019P1 Instructions Manual Download Page 10

English

English

18

19

IF THE SECOND HAND STARTS MOVING AT TWO-
SECOND INTERVALS
(ENERGY DEPLETION FOREWARNING FUNCTION)

When the second hand starts moving at two-second intervals whether it is worn
or left untouched, the watch may run down within approximately 12 hours.

When the watch wakes up from power save mode while it is running on extremely
low electrical power, the second hand starts moving at two-second intervals.

In such a case, swing the watch from side to side to sufficiently charge the
rechargeable battery, and then reset the time and calendar.

4. Turn the crown to set the month display hand to indicate the correct month. Then

continue to turn the crown to set the date.

Example: Date display of the 26th

5. Upon completion of the calendar adjustment in sequence of year, month and date,

push the crown back into the original position.

3. Turn the crown to rotate the year indicator until the desired indication appears.

Continue to turn the crown until the month becomes adjustable.

Month display

Example: Position of the month display hand (July)

 HOW TO CHARGE THE WATCH

1. Swing the watch from side to side rhythmically at a rate of twice a second as

shown in the illustration below.
This movement will recharge the watch to start moving at the normal one-second
intervals from the two-second interval movement. If you find the second hand
moving at two-second intervals after swinging the watch, swing it further until the
second hand moves at the normal one-second intervals.

After swinging the watch, check that the second hand is moving

at one-second intervals.

Summary of Contents for SNP019P1













Reviews: