background image

INTRODUCTION

Thank you for purchasing our Quartz Time Recorder. For safe and 
proper operation, please carefully read this manual before using it and 
save it for reference.

Die in dieser Bedienungsanleitung enthaltenen Angaben können jederzeit ohne vorherige 
Ankündigung geändert werden.

Diese Bedienungsanleitung wurde mit äußerster Sorgfalt erstellt, um alle Einzelheiten 
hinsichtlich der Bedienung des Zeiterfassungsgerätes darzustellen. Sollten Sie dennoch 
Fragen haben oder Fehler in der Anleitung entdecken, nehmen Sie bitte mit uns Kontakt auf.

Wir haften nicht für direkte oder indirekte Schäden, die durch die Verwendung dieser 
Betriebsanleitung entstehen.

Lesen Sie diese Anleitung aufmerksam und benutzen Sie lhr  Zeiterfassungsgerät erst dann, 
wenn Sie die Angaben über die Hardware und Software richtig verstanden haben.

The details of this User's Manual are subject to change without previous notification.
This User's Manual has been prepared with the utmost care to cover all aspects of the time 
recorder's use.
If you feel, however, that some explanations are inadequate, unclear, or difficult to 
understand, please do not hesitate to contact the dealer or the shop from which you have 
purchased your Time Recorder.
Be sure to use your Time Recorder after you have fully understood the hardware and 
software specifications and limits.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, 
in any form or by any means, mechanical, photocopying, recording or otherwise.
    Place the time recorder at the position close to the wall outlet so that it is easily  

accessible to disconnect.

Bescheinigung des Herstellers/Importeurs

Dies Gerät entspricht den Bedingungen der Niederspannungs-Vorschrift 

73/23/EEC und dem EMVG nach 89/336/EEC.

This unit complies with the Low Voltage Directive 73/23/EEC and the 

EMC Directive 89/336/EEC.

Maschinenlärminformations-Verordnung 3.  GPSGV: 

Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäss 

EN ISO 7779.

Die zugeho¨rige Steckdose muß nahe beim Gerät angebracht und leicht 

zugänglich sein.

1.
2.

3.

4.

1

Summary of Contents for Precision QR-6550





































































Reviews: