background image

www.seicane.com

Seicane S085991 2001-2011 Mercedes-Benz E Class G Class CLS Class aftermarket
car stereo head unit upgrade installation replacement instruction

Seicane S085991 2001-2011 Mercedes-Benz E Class G Class CLS Class car stereo after installation 

Please note:
This unit can be suitable for the following cars which are also with the same installation steps
as follows.

2002-2008 Mercedes-Benz E Class E200 E220 E240 E270 E280
2001-2008 Mercedes Benz G Class W463 G550 G500 G400 G320
2004-2011 Mercedes Benz CLS Class W219 CLS350 CLS500 CLS55  

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult

the professional.

7.   For   your   convenience,   here’s  the  recommended   tools   for   removal   and   installation   from

Seicane, please check for more details:  

http://www.seicane.com/car-dvd-dismantling-device-

srd-400

Summary of Contents for S085991






Reviews: