Section 3: Testing
Testing the Sacksafoam
Sacksafoam II Model 8044 Operations Manual
(Version C)
7
Section 3: Testing
Testing the Sacksafoam
Dry Test
Important Note
The testing procedure should be performed before every use to check the operation of the Sasksa-
foam unit.
Important Note
A dry test can be done to determine if all power hook-ups are correct. Set the controller to 10 sec-
onds, take one dip tube out and lift the float on the end of the dip tube. If the pump starts, the hook-
up is correct.
Power On
Dispensing
Ready
Reset
Reset
On/Off
Switch
Total
Drops
Current
Drops
Dispense
Standard
Controller
Console
Mount
Dispense Timer
