ThinPrint Settings
TPR User Manual
53
6.4
How to Define Timeouts (Experts only)
You can use timeouts to control how errors are handled before and
during a print job.
Printer connection
timeout
The 'Printer connection timeout' parameter specifies the period of
time (in seconds) after which a connection attempt to the printer
should be aborted. It is advisable to abort a connection attempt if
the printer is not physically available for the TPR and the ThinPrint
port is to be freed for subsequent print jobs, for example.
Job sending timeout
The 'Job sending timeout' parameter specifies the period of time (in
seconds) after which a current print job should be aborted. It is
advisable to abort a print job if the print job cannot be executed due
to a printer error (for example, no paper).
Both timeouts cause the print jobs to be deleted. In 'pure' ThinPrint
printing, an error message is also sent to the ThinPrint server. No
error message is sent to the ThinPrint server when printing takes
place via the Connection Service.
URL
Specifies the second part of the printer URL for IPP
printing. (Default = ipp/lp1)
Is used when selecting 'IPP' as the transfer method.
SSL
Enables/disables the SSL/TLS encryption for IPP
printing. The cipher strength is defined via the encryption
level
60.
Is used when selecting 'IPP' as the transfer method.
LPD Queue
Defines the queue name for LPD printing. (Default = lp1)
Is used when selecting 'LPD' as the transfer method.
RFC
Enables/disables the RFC1179 conformity for LPD
printing.
Is used when selecting 'LPD' as the transfer method. If
this option is disabled, the printing behavior resembles
that of Microsoft® LPD printing.
Parameters
Description
