Device Settings
TPR User Manual
41
address (<IP address>:8080). In the InterCon-NetTool, the TPR
appears as printer ('Type' column).
Proceed as follows:
1. Start the TPR Control Center.
2. Select
DEVICE - TPR-10
.
3. Enter the port numbers into the relevant boxes in the
Local
services ports
area.
4. Click
Save
to confirm.
The settings are saved.
4.4
How to Use the Notification Service
You can get notifications in the form of emails or SNMP traps from
the TPR. By means of these notifications up to four email recipients
can be informed about various events irrespective of time and
location.
The following message types are possible:
• The status email periodically informs the recipient about the
status of the TPR.
• The event notification informs you about a specific event on the
TPR via email or SNMP trap. The event can be:
–
The restart of the TPR.
–
A card event on the TPR.
–
The connection or disconnection of a USB flash drive to/from
the TPR.
–
A problem with the TPR.
What do you want
to do?
’Configuring the sending of status emails’
’Configuring event notifications via email’
