manualshive.com logo in svg

SEH Dongleserver myUTN-800, User Manual, Page: 27 / 157

Share
Download
SEH Dongleserver myUTN-800 User Manual Download Page 27

Administration Methods

myUTN User Manual Windows

27

Program Start 

To start the SEH UTN Managers, double-click the SEH UTN Manager

icon 

. The icon is found on the desktop or the Windows start

menu.

(Start 

 All Programs 

 SEH Computertechnik GmbH 

 SEH UTN Manager)

Changing Versions

If the minimal oder complete version of the SEH UTN Manager is
already installed on your system and you want to change to the
other version, you must first uninstall the existing version.

Update

You can get information about the update status of the SEH UTN
Manager. If an update is available, the installation file can be copied
to the computer and the program can be installed. In the case of
updates, the default settings are modified according to the existing
version.

Program Structure

After the program start you will see the main dialog with the fol-
lowing elements. The dialog may vary, depending on which elements
you have chosen to be shown or hidden.

Summary of Contents for Dongleserver myUTN-800






























































































































































Reviews:

No comments