Maintenance
myUTN User Manual Windows
114
2. Select
MAINTENANCE – Default settings
.
3. Click
Default settings
.
A security query appears.
4. Confirm the security query.
The parameters are reset.
Resetting the Parameters via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select the UTN server from the device list.
3. Select
Actions – Default Settings
from the menu bar.
4. Click
Finish
.
The parameters are reset.
Resetting the Parameters via the Reset Button
LEDs, the reset button and various ports can be found on the UTN
server. These components are described in the 'Quick Installation
Guide'.
Using the reset button you can reset the UTN server’s parameter val-
ues to their default setting.
Proceed as follows:
1. Press the reset button for 5 seconds.
The UTN server restarts.
(The Dongleserver myUTN-800 beeps when restarting.)
The parameters are reset.
