Segway®
Personal
Transporter
i2,
x2,
x2
Turf
Parts
Replacement
Guide
10
‐
1
10. Chassis Cover
This
chapter
describes
removal
and
installation
procedures
for
the
chassis
cover
on
a
Gen
2
Segway
PT.
The
following
warnings
apply
to
instructions
in
this
Section
10
regarding
the
Chassis
Cover:
Failure to do so
could result in
serious injury or
death.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
Failure to follow
these instructions
could lead to
electrical shock,
serious injury, death,
or damage to
property.
ESD PROCEDURES
Any time repair involves opening the console or chassis cover, best-
practice electrostatic discharge (ESD) control procedures must be
followed. Failure to follow ESD procedures could result in personal
injury or damage to property.
Read
all
instructions.
Power off
the Segway PT.
Unplug
the
Segway PT.
Applies to Models
i2,
x2,
x2
Turf
Qualifications
Certified
Service
Technician
Technician Replaceable Parts
Chassis
Cover
(20316
‐
00001)
Chassis
cover,
i2
with
warning
label
(no
fasteners
included)
Chassis
Cover
Fastener
(
20540
‐
00001
)
(12)
Chassis
fasteners
Required Tools
•
T
‐
27
6
‐
lobe
wrench
