ASSEMBL
Y AND
INST
ALLA
TION
25
6
Stability Bkt
M6x16 HEX BLT PAS (4)
6-3 INSTALLING THE STABILITY BKT
•
When operatin a cabinet in 2 player mode it is important to keep the cabinet
stable whilst at location. Therefore a STABILITY BKT MUST be installed to provide
safe operation. If the STABILITY BKT is not installed the cabinet may become
unstable and in extreem cases fall to the ground.
• It is not nescassary to install the STABILITY BKT when operating a 4 player
cabinet.
• In some cases where the floor may be uneven a wedge may be applied to
the underside of the base to pervent the cabinet from rocking.
1
Using an M6 socket wrench, fit and secure the STABILITY BKT to the rear of the cabinet in position shown
using 4x M6x16 HEX BLT PAS.
2
Once the STABILITY BKT has been fitted, make sure that the cabinet is stable. If there is any slight
movement or rocking motion then either adjust the STABILITY BKT or add a wedge to the underside of the
base to level out the cabinet.
