Seg SP760 Series, Instruction Manual

Page: 38 / 41

Smart Positioner
SP760 Series
Ver 1.0 SHINHWA Eng.
- 37 -
8. Error and Warning Code
While using products, if there is any problems, Error Code can re-checked in
LCD monitor directly and warning mode can be checked in VIEW mode.
8-1 Error Code
Indication Description
SP-760 Positioner model
SP-4MIS V1.1 Current positioner version.
4.18
0Y Od
It is total consumption time of products.
But if power supply connection consumption time is below
1 minutes, it is not total calculated.
1st row : "3.11" --> Indicates 3 h 11 m.
2nd row : Oy od -->Indicates year(s) and day(s).
3.12
FULL OP
It is automatic saving value after executing auto calibration
and it indicates total consumption time which valve takes
from opening time to closing time.
2.97
FULL CL
It is automatic saving value after executing auto calibration.
and it indicates total consumption time which valve takes
from closing time to opening time.
ERROR
Indicates error and warning code occurred.
Please refer to 14.1 or 14.2.
TEMP Current temperature (℃)
W LOCK /
W UNLOCK
It can be changed every parameter value including
auto calibration function (W UNLOCK ), or choose to lock
(W LOCK ) without amending.
* It can be changed after putting < ENTER >.
Error Code Error contents and cause Action
AIR CHK
ERROR_01
Indicates that valve does not move
even in FULL OPEN signal of the
positioner in auto calibration mode.
In Error happening , auto calibration
will be stop and displays in Error code
in LCD monitor use ESC button to
release and take action steps.
Check that positioner's
supplying air pressure
is normal or not
and take action whether
they may be supplied
normally or not.
AIR CHK
ERROR_02
Indicates that the positioner's angle
is small (AD value: below 500).
In the error code case, Auto Calibration
stops and the code is displayed on LCD,
use ESC button when requiring release
and take action steps.
Re-install the positioner's
angle into normal
degrees and execute
AUTO PV.