Seg SP760 Series, Instruction Manual

Page: 31 / 41

Smart Positioner
SP760 Series
Ver 1.0 SHINHWA Eng.
- 30 -
AUTO PV re-set Zero Point ( 0% ) and End point ( 100% ) only.
--> Execute AUTO CAL without changing existing parameter.
It is used when the positioner installation location is slightly required to modify.
<ENTER>
5sec
interval
→
<ENTER>
→
Automatical
setting for
dozen
seconds
→
.
AUTO ALL : Set all parameter values suitable to Zero Point, End point,
and parameter value suitable to driving facility.
<ENTER>
→
<ENTER>
→
Automatically
setting for
dozen of
minutes
→
7-5 Manual Mode ( MANUAL )
In case that signal ( 4-20mA DC ) does not supply to positioner, actuator can be
moved up and down voluntary by pressing <DOWN > or <UP> button in manual mode.
<ENTER 5 sec
+ UP 1 time
→
<ENTER>
→
<UP>/<DOWN>
→
<ESC 2times>
→
7-6 Parameter Mode ( PARAMETER )