SEFRAM 902406500, User Manual

Page: 38 / 78

Page 4.17
4.14. « Record » key
This key has various effects according to the way you use it.
Launching the data acquisition into a file and position of the appliance in a stand-by mode,
waiting for the trigger condition Start .
In any case, you can force the triggering and stop without fulfillment of the conditions inside
the recorder by pressing (to force the record) and (to force the stop).
The following shows up on the screen:

current sampling speed

status of data acquisition (waiting for trigger, sampling rate xx%, …)
4.15. Screen copy
You can create a file copying the content of the LCD screen:
You only have to press
the key up right of the screen.
A file will be created, either on the USB stick if present, or into the internal memory.
The name of the file will be bmpxxxxx.bmp (incremental name)
In the internal memory, the files are saved into the « FolderBMP » folder.
You can either copy this folder onto an USB stick or erase it.
You can also use a ftp link to recover these files.