SeeedStudio SARK-110, User Manual, Page: 27 / 103

SARK-110 User’s Manual
Rev 1.2.19 January 12
th
, 2020 - 27 - © Melchor Varela
– EA4FRB 2011-2020
2.12 Changing the Operating Mode
Use Navigator A to highlight «MODE» in the main menu.
Press the Select [
■
] button to activate the Mode popup submenu; see the screenshot below:
Use Navigator B to highlight the desired submenu mode option. Press the Select [
■
] button to
validate the selection. Press any other button to cancel the operation.
As of firmware version v0.9.4
, Save Conf. [▲] button can be used to launch Mode menu.
2.13 Changing the Settings
Use Navigator A to highlight «SETUP» in the main menu.
Press the Select [
■
] button to activate the Setup popup submenu; see the screenshot below:
Use Navigator B to highlight the desired submenu setup option. Press the Select [
■
] button to
validate the selection. Press any other button to cancel the operation.
As of firmware version v0.9.4
, Save Screen [●] button can be used to launch Setup menu if
pressed for few seconds.