Galeo S / Galeo S Sub
4 Components of the system
9
4.3
Galeo S (Line Array mid-high unit)
4.3.1
Cabinet
Position
Name
Description
A
Snap-Fly Links
Two locking connecting links to mount the Galeo S unit to the Flying
Frame or to the next Galeo S unit above
B
Front Links
Counter piece to the Snap-Fly links [A]; Connected to the Flying Frame
from above in stacked application
C
Center Link
For rear connection to the next lower Galeo S unit or for connection to
the perforated rail of the Flying Frame in stacked application; Is extend-
ed to the maximum length in the transport position and is getting locked
to the desired length when in use
D
Auto-Locking Hook
Two hooks that latch alternately in to the Center Link [C] to take the
load in a curved array
E
Indexed Center Rails
Perforated rail with 16 holes for the Stop Pin [F] to pre-select the splay
angle between 0° and 15° in one degree steps. For a 16° angle, the
Stop Pin [F] is not inserted. Additional hole at the top of the rail is for the
Link Pin [G]
F
Stop Pin
Stop ball-lock pin 6x20 mm with T-handle; Pin is inserted in the lowest
hole of the perforated rail [E] for transport; Is being plugged (without any
load on it) in the position of the desired splay angle to the next lower
Galeo S unit
G
Link Pin
Link ball-lock pin 6x20 mm with T-handle; Pin is inserted in the upper-
most hole of the perforated rail [E]; For connection to the Center Link of
the Galeo S unit above respectively to a Flying Frame
