Galeo S / Galeo S Sub
4 Components of the system
10
4.3.2
AMR-Panels
The coverage of a sound reinforcement system is of primary importance: only a very small part of
the audience is exactly on the axis of one loudspeaker array system. Therefore, we placed a lot of
value during the development of the Galeo S system on an absolutely symmetrical horizontal cov-
erage over the entire frequency range.
The mid-range speakers are covered by AMR-Panels which also function as the horn for the high-
frequency drivers.
Due to the special arrangement, size and shape of the hole, an ideal ratio of sound outlet for the
mid-range and horn guidance for the high range is achieved. The Galeo S is delivered as standard
with horn elements (Art. 08141/100) that provide uniform horizontal coverage over 100°. By replac-
ing the 100° panels with covers with a 70° (Art. 08141/70) horn function, the nominal coverage can
be changed accordingly. This change is particularly appropriate for the uppermost elements of an
array, where the width of coverage is not required and a longer throw is necessary. The front grille
is held by small neodymium magnets and secured by a steel cable (safety).
The vertical coverage is determined by the curving and the tilt of the array (section 6.3)
70° AMR-Panels (Art. 08141/70)
100° AMR-Panels (Art. 08141/100)
The AMR-Panels are mounted directly over the mid-range drivers via four M5 x 30 hex-head
screws.
