HE43N -2
HE43BN-2
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
This installation manual will enable you to obtain a safe, efficient
and dependable installation of your fireplace system. Please read
and understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any cir-
cumstances. Any modification or alteration of the fireplace system,
including but not limited to the fireplace, chimney components and
accessories, may void the warranty, listings and approvals of this system
and could result in an unsafe and potentially dangerous installation.
Security Chimneys International wood-burning fireplaces are designed
for use as a supplemental heater. They are not intended for continuous
use as a primary heat source.
INSTALLATION AND
OPERATION INSTRUCTIONS
WARNINGS
•
Hot! Do not touch! The glass and
surfaces of this appliance will be hot
during operation and will retain heat
for a while after shutting off the appli-
ance. Severe burns may result.
•
Carefully supervise children in the
same room as appliance.
HE43-2
MODEL
WARNINGS
•
The fireplace cannot be operated without doors
or firescreens. Consult your dealer to select the
correct replacement door(s) or firescreen(s).
•
Important! To assure proper alignment of glass
doors: Install this fireplace in a square and
plumb condition, using shims as necessary at
sides and/or bottom.
•
Install the fireplace only as described in these
instructions.
PIHE43-2 REV. 2 06/2010
EPA Low-Mass Wood-burning Fireplace Phase 2 Qualified
43" Wood-Burning Fireplaces
P/N 506065-07 REV. B 06/2010
Listed to standards:
ULC-S610 & UL-127
ASTM 2558
Report No. 192-5237
Intertek
