Direct Programming Manual
Edge
Smart Keypads and Card Readers
64
If you need help, please email
or call
(972) 474-6390
.
Wiegand input is disabled.
Wiegand input is configured to share code list with non-Wiegand codes.
Split relay feature is enabled.
Set Unit Clock Time
This procedure will set the clock on the Edge unit.
1251
$
6
$
302
$
XX (Hours)
$
XX (Minutes)
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 302 and listen for good tone.
Enter hours in 24-hour format (00 to 23) and listen for good tone.
Enter minutes (00 to 59) and listen for good tone.
Enter # key to exit Programming Mode.
Set Unit Clock Date
This procedure will set the date on the Edge unit.
1251
$
6
$
303
$
XX (month)
$
XX (day of month)
$
XX (last two digits of year)
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter next sub mode 303 and listen for good tone.
Enter month (01 to 12) and listen for good tone.
Enter day of month (01 to 31) and listen for good tone.
Enter last two digits of year (00 to 99) and listen for good tone.
Enter # key to exit Programming Mode.
Configure Split-Relay Function
These procedures will configure the split-relay function.
IMPORTANT! CHANGING THE SPLIT-RELAY CONFIGURATION WILL DELETE ALL WIEGAND
CODES INCLUDING MANAGER AND SLEEP CODES!
Note: Enabling split-relay functionality while anti-passback is enabled may cause some
undesirable effects.
Note: These procedures will not work if any of the following are true:
One or both Wiegand inputs are disabled.
One or both Wiegand inputs are configured to share code list with non-Wiegand codes.
