Direct Programming Manual
Edge
Smart Keypads and Card Readers
8
If you need help, please email
or call
(972) 474-6390
.
1251, 1273, 1366, 1381, 1387, 1678, 1752, and 1985.
1251
$
4
$
4
$
XXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 4 and listen for good tone.
Enter secondary sub mode 4 and listen for good tone.
Enter new sleep code (4 digits; numbers only) and listen for good tone.
Enter # key to exit Programming Mode.
Change Code Length
This procedure will change the code length for non-Wiegand codes from 4 to 11 digits.
IMPORTANT! COMPLETING THIS PROCEDURE WILL DELETE ALL ACCESS AND LATCH CODES!
1251
$
4
$
5
$
XX
$
1251
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 4 and listen for good tone.
Enter secondary sub mode 5 and listen for good tone.
Enter code length (04 to 11) and listen for good tone.
Enter Master Code and listen for good tone.
Enter # key to exit Programming Mode.
Change Relay Trigger Time
This procedure will change the relay trigger time for Relay A or B from 1 to 999 seconds.
1251
$
4
$
6
$
X
$
XXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 4 and listen for good tone.
Enter secondary sub mode 6 and listen for good tone.
Enter 1 (for Relay A) or 2 (for Relay B) and listen for good tone.
Enter trigger time in seconds (001 to 999) and listen for good tone.
(e.g., 10 seconds would be entered as 010.)
Enter # key to exit Programming Mode.
Enable/Disable Timers and Schedules
This procedure will enable or disable timers and schedules.
1251
$
4
$
7
$
1
$
#
