Edge
Smart Keypads and Card Readers
Direct Programming Manual
If you need help, please email
or call
(972) 474-6390
.
7
Change Master Code
This procedure will change the current Master Code.
Note: By default, the following codes are reserved for other functions and cannot be used:
1251, 1273, 1366, 1381, 1387, 1678, 1752, and 1985.
1251
$
3
$
XXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 3 and listen for good tone.
Enter new Master Code (4 digits; numbers only) and listen for good tone.
Enter # key to exit Programming Mode.
Enable/Disable Relays
This procedure will enable or disable Relay A or B.
1251
$
4
$
2
$
X
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 4 and listen for good tone.
Enter secondary sub mode 2 and listen for good tone.
Enter 1 (for Relay A) or 2 (for Relay B).
Enter 1 (to enable) or 2 (to disable).
Enter # key to exit Programming Mode.
Add Latch Code to Relay B
This procedure will add a latch code to Relay B.
Note: By default, the following codes are reserved for other functions and cannot be used:
1251, 1273, 1366, 1381, 1387, 1678, 1752, and 1985.
1251
$
4
$
3
$
XXXX
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 4 and listen for good tone.
Enter secondary sub mode 3 and listen for good tone.
Enter code (4 digits by default; numbers only) to be added and listen for good tone.
Enter # key to exit Programming Mode.
Change Sleep Code
This procedure will change the sleep code.
Note: By default, the following codes are reserved for other functions and cannot be used:
