Q U I C K S TA R T
G U I D E
ADVANTAGE DKLP
1 of 4
Model
19-100
2
Make sure you have everything shown here.
START HERE
Keypad Unit
Key
Carriage Bolt
( 4x )
Hex Nut
( 4x )
1
Carefully unpack box.
Reset Button
For performing reset procedures
Power and Relay Terminals
For wiring to gate operator or
door opener and power
POWER MUST BE 7–14 VDC!
Keypad Unit Front Panel
Continued on next page...
Unit shown with front panel fully open.
CAUTION!
Double check your wires! You must wire from
positive on keypad unit to positive on your
power source and negative on keypad unit to
negative on your power source.
Reverse polarity can damage keypad unit!
What’s what?
Important components labeled
3
Unlock and open front panel
of keypad unit; then using
carriage bolts and hex nuts,
attach unit to pedestal as shown.
WARNING!
AUTOMATIC GATES CAN CAUSE
SERIOUS INJURY OR DEATH!
ALWAYS CHECK
that the
GATE PATH IS
CLEAR BEFORE OPERATING!
REVERSING
or other
SAFETY DEVICES
SHOULD ALWAYS BE USED
!
