Securepoint RC 100 Product Overview Download

Page: 17 / 210

4 Administration Interface

Securepoint 10

Securepoint

Security Solutions

4 Administration Interface

4.1 Connecting the Appliance

You access the appliance with your browser on the IP address of the internal interface on the

port 11115 using the https (SSL) protocol.

The factory setting for the internal IP address is 192.168.175.1. The port 11115 cannot be

changed. It is reserved for the administration.

User name and password are set to the following by default.

User name:

admin

Password:

insecure



Start your

internet browser

and insert the following value into the address field:

https://192.168.175.1:11115/
If you have changed the IP address at the installation, replace the IP address
192.168.175.1 with the new one.



The dialog

LOGIN

appears.

fig. 6 Login dialog



At the field

Username

insert

admin



At the field

Password

insert

insecure

or the new password, if you change it during

the installation process.



After this click

Login



You will be logged on to the system and the start screen appears.

Note:

Change your password as quickly as possible. Use the navigation bar icon

Au-

thentication

, item

Users

Use upper- and lowercase characters, numerals and special characters. Your

password should be eight characters long.

Summary of Contents for RC 100



















































































































































































































Search results

Summary of Contents for RC 100

Reviews:

Related manuals for RC 100

Brands by name

Popular brands

Securepoint RC 100, Product Overview

Search results

Summary of Contents for RC 100

Reviews:

Related manuals for RC 100

Brands by name

Popular brands