68
SPOT SETUP
Your DVR can set up 3 spot monitors and assign cameras to each spot. Highlight the SPOT SETUP in the
main menu and press the enter button. The following SPOT SETUP screen will appear.
Figure – SPOT SETUP(1). Figure – SPOT SETUP(2).
You can turn on or off the Rotation for the assigned cameras for each spot. Turn on or off the ROTATE by
highlighting the box below ROTATE and pressing the enter button.
You can assign cameras to each spot by highlighting the box below and press the enter button.
You can select cameras by checking the camera numbers on the popup screen. Refer to the Figure 69 –
SPOT SETUP(2).
You can set up the rotating dwell time by highlighting the box below I and pressing the enter
button. It can be set up to 256 seconds.
means the channel number shown when sequence is off and this channel is selected within the
sequence.
When turning on Popup, channels that are having events will be popped up to the assigned spot monitor.
NOTE: Same cameras can’t be shown on the spot monitors at the same time. When selecting
ROTATE-ON and all cameras for all of 3 spots, the spot 1 will display camera number 1, spot 2 –
camera number 2 and spot 3 – camera number 3. When selecting ROTATE – ON, all cameras for all
of 3 spots will be affected by the different time interval in rotating the cameras.
Digital Video Recorder
Summary of Contents for AT-A1600
Page 109: ...109 Digital Video Recorder ...