CORONA 3 + 2 DRAWER CHEST
ASSEMBLY INSTRUCTIONS
50995(MY)
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
floor and the product.
• Assemble this product as close to its final position as possible.
• Do not place this product next to a radiator or in direct sunlight.
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
PAGE 1
SEC/WG/09/17/MY1
FOR DOMESTIC USE ONLY
