Pos.
Description
1
Ethernet U16 (Gigabit)
2
Ethernet J20 (10/100 MBit)
3
Power (J9)
4
CAN/RS-485/UART Interface (J12)
Optional with galvanic isolation
5
USB Host 1 (J7)
6
USB Host 2 (J6)
7
Speaker (J19)
8
RS-232/MDB (J10)
9
USB OTG (J5)
10
USB Host 3 (J13)(optional)
11
Microphone (J25)
12
SD - card slot (J11)
13
Power LED (D36) not illustrated
Pos.
Description
14
Status LED (D22) not illustrated
15
Boot - Select Swich (SW2)
1
16
Reset Switch (SW1)
17
Display LVDS (J13, J14 [bottom]); 1st LVDS Channel
18
Battery (BAT1)
19
Speaker internal (J18)
20
Display Backlight (J15)
21
JTAG Debug Interface (J401, J2 [bottom])
22
WLAN/Bluetooth Antenna (J27)
23
Capacitive Touch (J16)
24
PCIe Half Mini connector (U20)
25
SIM connector(U21); (Micro Sim Size)
26
Sound/GPIO/I2C (J21)
27
Microphone (J22)
1 2
PRODUCT MANUAL
TANARO core
4.3 Connectors
As this manual describes a core version, the internal and external interfaces will be mentioned in the following
chapter.
(Exemplary Illustration front side. The illustration shows the fully equipped TANARO Quadcore.
1
For the function of this switch please refer in the future to the Flash N Go User Manual.
